Lenovo ThinkServer TS430 Hardware Maintenance Manual Download Page 123

Page: 123 / 264

• Use any documentation that comes with the TR 700 Battery and follow those instructions in addition to

the instructions in this topic.

To remove the TR 700 Battery, do the following:

1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all

power cords from electrical outlets and disconnect all cables that are connected to the server.

2. Remove the server cover. See “Removing the server cover” on page 87.

3. Lay the server on its side for easier operation.

4. If a PCI card bracket assembly is installed in your server, remove the PCI card bracket assembly. See

“Removing and reinstalling the PCI card bracket assembly” on page 91.

5. Locate the ThinkServer RAID 700 Adapter, which is located in the PCI-E slot 3 on the system board.

6. Remove the ThinkServer RAID 700 Adapter, which is a kind of RAID card. See “Installing or removing

the RAID card” on page 103.

7. Carefully remove the three screws that secure the TR 700 Battery and then remove the TR 700 Battery

from the ThinkServer RAID 700 Adapter.

Note:

Center the screwdriver when you remove the screws to avoid possible damage to any parts.

Figure 52. Removing the TR 700 Battery from the ThinkServer RAID 700 Adapter

8. If you want to install a new TR 700 Battery, see “Installing the TR 700 Battery” on page 109.

9. Reinstall the ThinkServer RAID 700 Adapter with a new TR 700 Battery or without a TR 700 Battery. See

“Installing or removing the RAID card” on page 103.

10. Reinstall the PCI card bracket assembly. See “Removing and reinstalling the PCI card bracket

assembly” on page 91.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the removal procedure, go to “Completing the parts replacement” on page 177.

Installing or removing the ThinkServer RAID 100 upgrade key for
Advanced RAID

This topic provides instructions on how to install or remove the ThinkServer RAID 100 upgrade key for
Advanced RAID (hereinafter referred to as the TR 100 key).

Chapter 6

Installing, removing, or replacing hardware

111

Summary of Contents for ThinkServer TS430









































































































































































































































































Search results

Summary of Contents for ThinkServer TS430

Reviews:

Related manuals for ThinkServer TS430

Brands by name

Popular brands

Lenovo ThinkServer TS430, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkServer TS430

Reviews:

Related manuals for ThinkServer TS430

Brands by name

Popular brands