Lenovo ThinkServer TS430 Hardware Maintenance Manual Download Page 147

Page: 147 / 264

3. The non-hot-swap hard disk drives are installed in the lower hard-disk-drive cage and are protected

by an EMI-protective panel. Press the small tab

on the EMI-protective panel from the bottom and

then pivot the EMI-protective panel upward to remove it from the chassis and gain access to the
non-hot-swap hard disk drives.

CPU

MEM

PSU

CPU

MEM

PSU

Figure 71. Removing the EMI-protective panel

4. Remove the server cover. See “Removing the server cover” on page 87.

5. Remove the front system fan 1. See “Replacing the front system fan” on page 158.

6. Locate the appropriate non-hot-swap hard disk drive. See “Server components” on page 25. Then,

disconnect the SATA signal cable and the power cable from the rear of the non-hot-swap hard disk drive.

Chapter 6

Installing, removing, or replacing hardware

135

Summary of Contents for ThinkServer TS430









































































































































































































































































Search results

Summary of Contents for ThinkServer TS430

Reviews:

Related manuals for ThinkServer TS430

Brands by name

Popular brands

Lenovo ThinkServer TS430, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkServer TS430

Reviews:

Related manuals for ThinkServer TS430

Brands by name

Popular brands