Lenovo ThinkServer TS430 Hardware Maintenance Manual Download Page 104

Page: 104 / 264

a. Press the release tab

in the direction shown and then carefully lift the PCI card bracket assembly

slightly upward until the two mounting studs

on the chassis are in the central position of the

corresponding holes in the PCI card bracket assembly.

Figure 38. Releasing the PCI card bracket assembly

b. Carefully move the PCI card bracket assembly to the top side of the chassis until the PCI card

bracket assembly is released from the mounting studs on the chassis. Then, lift the PCI card bracket
assembly out of the chassis.

Figure 39. Removing the PCI card bracket assembly

ThinkServer TS430 Hardware Maintenance Manual

Summary of Contents for ThinkServer TS430









































































































































































































































































Search results

Summary of Contents for ThinkServer TS430

Reviews:

Related manuals for ThinkServer TS430

Brands by name

Popular brands

Lenovo ThinkServer TS430, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkServer TS430

Reviews:

Related manuals for ThinkServer TS430

Brands by name

Popular brands