manualshive.com logo in svg

Krone Comprima V 180, Original Operating Instructions, Page: 99 / 242

Share
Download
Krone Comprima V 180 Original Operating Instructions Download Page 99

KRONE ISOBUS terminal (CCI 1200)

10

Setting units on the terminal

10.5

Comprima V 180

Original Operating Instructions 150001053_00_en

99

Main window (3)

Values (figures) shown in blue in the main window can be selected using the touch function.

There are the following main window views:

•

Road travel screen

•

Working screen/s, 

refer to page 106

•

Menu level, 

refer to page 114

10.5

Setting units on the terminal

The units, e.g. metric or imperial, can be set on the terminal in the menu "User settings". This
setting is accepted after the terminal has been restarted as well as for the machine software.

The procedure and other settings can be found in the operating instructions for the terminal.

Summary of Contents for Comprima V 180



















































































































































































































































Reviews:

No comments