Settings
15
Using the bale ejector 15.13
Comprima V 180
Original Operating Instructions 150001053_00_en
159
If the film is not jammed between the insulation of the pressure shaft (2) and the conical
roller (3):
Start the tractor.
Open menu 15-1 "Sensor test" on the terminal,
.
Press the
key until the conical roller (3) is positioned on the insulation of the pressure
shaft (2) and the film jams between the insulation and pressure shaft.
Select the
key.
Æ
The set position is saved. The
icon is displayed.
15.13
Using the bale ejector
1
RP000-502
The round bale is automatically conveyed from the bale chamber via the bale ejector onto the
field.
NOTICE
Machine damage due to an incorrectly positioned bale ejector
The connecting rod can be bent if the bale ejector is not positioned on the axis after ejection.
After the round bale has been laid down, the bale chamber is closed and whilst new crops are
being taken in, the bale ejector must be positioned again on the axis.
Have the setting of the bale ejector be checked by a KRONE service partner.