manualshive.com logo in svg

Krone Comprima V 180, Original Operating Instructions, Page: 94 / 242

Share
Download
Krone Comprima V 180 Original Operating Instructions Download Page 94

9

KRONE Beta II terminal

9.2

Switching terminal on/off

94

Comprima V 180

Original Operating Instructions 150001053_00_en

9.2

Switching terminal on/off

1

I

II

EQ001-029

„

Before switching on the terminal for the first time, check that the connections are correct and
tight.

Switching on

„

Move the toggle switch (1) from position I to position II.

ð

If the machine is not connected, the display shows the main menu after switching on.

ð

If the machine is connected, the display shows the road travel screen after switching on.

Æ

The terminal is ready to operate.

Switching off

„

Move the toggle switch (1) from position II to position I.

If machine is not connected “Main window”

If machine is connected "Road travel"

EQG001-003

INFORMATION

„

For more details on how the terminal functions, follow the terminal operating instructions.

INFORMATION

When the terminal is switched on for the first time, the machine configuration is loaded into
the terminal and saved in the terminal memory. Loading may take a few minutes.

Summary of Contents for Comprima V 180



















































































































































































































































Reviews:

No comments