6
Initial operation
6.7
Mounting the bale ejector
52
Comprima V 180
Original Operating Instructions 150001053_00_en
X
2
3
4
5
6
1
1
7
8
1
RPG000-098
Set the linkage (1) with the hole pattern (8) to the dimension
X=2.567 mm
.
Push the linkage (1) on the left and right on the stud bolt (7) of the frame and secure with a
disc (5) and clamping sleeve (6).
Push the linkage (1) on the left and right on the stud bolt (2) of the tailgate and secure with a
disc (3) and clamping sleeve (4).
1
5
3
4
2
RP000-498
Hook the tension spring (2) into the link (1) on the mounting plate.
Hook the eye bolt (3) into the tension spring (2) and guide it through the bore hole (5).
Secure with the disc and nut (4).
Tighten the nut (4) until the bale ejector swings safely into the basic setting after depositing
the round bale.