Krone Comprima V 180, Original Operating Instructions, Page: 182 / 242

16 Maintenance
16.17 Adjust drive chains
182
Comprima V 180
Original Operating Instructions 150001053_00_en
The dimension X
1
and X
2
of the tensioned spring length must be X
1
=60 mm and X
2
=60 mm .
ü The machine is shut down and safeguarded, refer to page 25 .
ü The pick-up is lowered to working position, refer to page 75 .
ü
The pick-up guard on the right side of the machine has been removed.
ü
The drive chains (1) and (2) and the pick-up guard have been cleaned.
„
To increase the chain tension, turn nut (4) and (5) clockwise until the dimension X
1
=60 mm
and X
2
=60 mm has been set.
„ To reduce the chain tension, turn nut (4) and (5) anti-clockwise until the dimension
X
1
=60 mm and X
2
=60 mm has been set.
INFORMATION
The drive chain is supplied with oil via the central chain lubrication system, refer to page 91 .
Spring discs of the pick-up drive
1
2
RP000-472
„
After repairing the pick-up drive (1), ensure that the disc springs (2) are arranged as shown.
16.17.2 Drive chain of the intake
1
2
X
3
RP000-471
The drive chain (1) of the intake (starter rollers/feed roller) is located on the right side of the
machine.
The dimension X of the tensioned spring length (2) must be X=200 mm .
ü The machine is shut down and safeguarded, refer to page 25 .
ü
The right side hood is open.
„
To tension the drive chain (1), use the nut on the eyelet bolt (3) to set the
dimension
X=200 mm .