Krone Comprima V 180 Original Operating Instructions Download Page 143

Page: 143 / 242

Driving and transport

Checking road travel lighting

14.4

Comprima V 180

Original Operating Instructions 150001053_00_en

143

With bottom suspension of the drawbar

RP000-487

Fold out the universal shaft bracket (1) and place the universal shaft (2) on the universal
shaft bracket (1).

14.4

Checking road travel lighting

RPG000-073

Connect the road travel lighting to the vehicle electrical system,

refer to page 64

Check whether the rear lights (1) are functional.

Clean the rear lights (1) and the side reflectors (2).

RPG000-074

The 2 reflectors (1) are located on the rear of the taillights.

Clean the reflectors (1).

Summary of Contents for Comprima V 180



















































































































































































































































Search results

Summary of Contents for Comprima V 180

Reviews:

Krone Comprima V 180, Original Operating Instructions, Page: 143 / 242

Search results

Summary of Contents for Comprima V 180

Reviews: