manualshive.com logo in svg

Krone Comprima V 180, Original Operating Instructions, Page: 179 / 242

Share
Download
Krone Comprima V 180 Original Operating Instructions Download Page 179

Maintenance

16

Setting the scraper and stone deflector 16.13

Comprima V 180

Original Operating Instructions 150001053_00_en

179

INFORMATION

It is possible to turn the clamping wedge by 180° as its dimensions from oblong hole to the
upper and lower stop edge are different.

Setting and tightening the scraper reinforcer

For the "Net and chamber film wrapping" version

1

3

1

3

4

2

RP000-302

„

Place the scraper reinforcer (3) on the spiral roller (4).

„

Tighten the screw connections (2), tightening torque, 

refer to page 166

.

16.13.2

Setting the stone deflectors

All stone deflectors on the deflection shafts must be regularly checked and adjusted.

1

1

2

RP000-312

Proceed as follows on all stone deflectors:

„

Set the stone deflector (1) parallel and at a distance of 

5-10 mm

 from the bale formation

conveyor (2).

Summary of Contents for Comprima V 180



















































































































































































































































Reviews:

No comments