Krone Comprima V 180, Original Operating Instructions, Page: 183 / 242

Maintenance 16
Adjust drive chains 16.17
Comprima V 180
Original Operating Instructions 150001053_00_en 183
INFORMATION
The drive chain is supplied with oil via the central chain lubrication system, refer to page 91 .
16.17.3 Drive chain of the bale formation conveyor
Front bale formation conveyor
7
1
6
2
4
X
2
X
1
8
5
3
RP000-462
The drive chain (1) of the front bale formation conveyor drive is on the left side of the machine.
The dimension X
1
of the tensioned spring length (4) must be X
1
=220 mm .
The dimension X
2
of the stop rubber (7) must be within a range of X
2
=105-110 mm .
Setting drive chain
ü
The machine is shut down and safeguarded, refer to page 25 .
ü
The left side hood is open.
„ To tension the drive chain (1), use the nut on the eyelet bolt (5) to set the dimension
X
1
=220 mm .
If the spring tension cannot be set to the dimension X
1
in this way:
„ Remove the support (3).
„
Turn and mount the support (3) vertically by 180°.
„ Mount the spring (4) on the borehole (2).
„
Use the nut on the eyelet bolt (5) to set the dimension X
1
=220 mm .
Setting the stop
„
To set the stop, use the nut (8) to set the dimension X
1
=105-110 mm .
„
Ensure that the support (6) and stop rubber (7) do not touch each other and that there is a
slight gap.