manualshive.com logo in svg

Krone Comprima V 180, Original Operating Instructions, Page: 176 / 242

Share
Download
Krone Comprima V 180 Original Operating Instructions Download Page 176

16

Maintenance

16.11 Clean the bushing and the drawbar eye

176

Comprima V 180

Original Operating Instructions 150001053_00_en

For the "Net and chamber film wrapping" version

1

RP000-468

„

Check the conical roller (1) for any corrosion and remove the corrosion as required.

„

Remove any corrosion from the brake surface of the brake disc (not shown here) on the
wrapping material brake.

16.11

Clean the bushing and the drawbar eye

RP000-198

The drawbar eye must always be coupled horizontally in the towing hitch. The wear limit of
bushing (1) in the drawbar eye (2) is X=43 mm. If the dimension X is exceeded, the drawbar eye
(1) must be replaced by a KRONE service partner.

„

To minimize wear, clean the bushing (1) and the drawbar eye (2) several times a day and
coat with grease.

Summary of Contents for Comprima V 180



















































































































































































































































Reviews:

No comments