Krone Comprima V 180, Original Operating Instructions, Page: 185 / 242

Maintenance 16
Checking rear bale formation conveyor 16.18
Comprima V 180
Original Operating Instructions 150001053_00_en 185
16.17.5 Drive chain of the rollers
1
2
X
3
RP000-474
The drive chain (1) of the rollers is located on the right side of the machine.
The dimension X of the tensioned spring length (3) must be X=220 mm .
ü
The machine is shut down and safeguarded, refer to page 25 .
ü The right side hood is open.
„
To tension the drive chain (1), use the nut (2) to set the dimension X=220 mm .
INFORMATION
The drive chain is supplied with oil via the central chain lubrication system, refer to page 91 .
16.18 Checking rear bale formation conveyor
2
3
1
X
B
4
RP000-453
The rear bale formation conveyor should be regularly checked to prevent the rear bale
formation conveyor from being damaged or torn.
The maintenance intervals are in the maintenance table, refer to page 160 .
„ Start to press a round bale (4) with the machine.
„
When the bale diameter of the round bale (4) is X=800-1,000 mm , stop the machine.
„ Shut down and safeguard the machine, refer to page 25 .
„
Check the dimension Y between the front tensioning rocker (1) and the rear tensioning
rocker (2).
Æ If the dimension Y>20 mm , the setting is correct.
Æ
If the dimension Y<20 mm , the deflection roll (3) must be moved, refer to page 186 .