Settings
15
Setting the lock of the tapered roller
15.8
Comprima V 180
Original Operating Instructions 150001053_00_en
153
Setting the chamber film wrapping (from position (I) to position (II))
To lock the locking pin with ball head (3), turn the ball head clockwise until the roll pin (4)
moves through the slot.
At the same time, move the tension lever (2) downwards to the borehole.
Æ
The compression spring automatically presses the bolt into the borehole.
Setting the net wrapping (from position (II) to position (I))
To release the locking pin with ball head (3), turn the ball head anti-clockwise and pull the
bolt in the direction of the arrow until the roll pin (4) moves through the slot and the bolt has
engaged.
15.8
Setting the lock of the tapered roller
For the "Net and chamber film wrapping" version
1
I
II
2
2
RP000-465
Position (I) (net wrapping)
The lever (2) locks the conical roller (1) to prevent it from rotating during net wrapping.
Position (II) (chamber film wrapping)
The lever (2) releases the conical roller (1) to prevent it from rotating during chamber film
wrapping.
To lock the conical roller (1) for net wrapping, move the lever (2) into position (I).
To release the conical roller (1) for chamber film wrapping, move the lever (2) into
position (II).