manualshive.com logo in svg

Krone Comprima V 180, Original Operating Instructions, Page: 108 / 242

Share
Download
Krone Comprima V 180 Original Operating Instructions Download Page 108

12

Terminal machine functions

12.7

Operating TIM 1.0 (Tractor Implement Management)

108

Comprima V 180

Original Operating Instructions 150001053_00_en

12.7

Operating TIM 1.0 (Tractor Implement Management)

For version with "TIM 1.0"

12.7.1

Mode of operation of TIM 1.0

 WARNING

Risk of injury due to unpredictable movement of the round bales when the machine is
operating on a slope

If round bales are deposited on a slope, they may start moving on their own. Once round
bales have started moving, their weight and cylindrical shape may cause serious accidents
and injure people.

„

On slopes, deposit round bales in manual mode only.

„

On slopes, always deposit round bales in such a way that they cannot start moving on
their own.

TIM 1.0 (Tractor Implement Management) uses data exchange between the ISOBUS job
computers on machine and tractor so that the machine can control the tractor and therefore
take pressure off the driver.

When the tying cycle starts, the tractor is automatically stopped by TIM. When the tying cycle is
complete, the tailgate is automatically opened by TIM, the round bale is ejected and the tailgate
is closed. To bale the next round bale, the driver only has to approach the tractor. Then the
tractor driver must independently drive at a speed adjusted to visibility, weather or ground
conditions.

12.7.2

TIM displays and keys on the working screen

125

cm

1

160

140

120

100

80

100%

5

∑

1

0  cm

TIM

TIM

EQG003-096

The following TIM displays are possible:

Summary of Contents for Comprima V 180



















































































































































































































































Reviews:

No comments