Krone Comprima V 180, Original Operating Instructions, Page: 219 / 242

Malfunction, cause and remedy 17
Faults of the electrics/electronics 17.5
Comprima V 180
Original Operating Instructions 150001053_00_en 219
Possible cause Remedy
FMI 2: The tailgate is open while starting up the machine.
The tailgate is not locked. „
Close the tailgate using the tractor hydraulics.
The sensor is defective or has
been incorrectly set. „ Check and set the sensors B11/B12 “Lock hook bale
chamber left/Lock hook bale chamber right”,
refer to
page 133 .
522048-
Tailgate
Possible cause Remedy
FMI 2: – The tailgate is open during road operating mode.
The tailgate is not locked. „ Close the tailgate using the tractor hydraulics.
The sensor is defective or has
been incorrectly set.
„
Check and set the sensors B11/B12 “Lock hook bale
chamber left/Lock hook bale chamber right”,
refer to
page 202 .
522049-
Tailgate
Possible cause Remedy
FMI 2:An open tailgate was detected, although no tying has occurred since it was last closed.
„
The baling pressure is too
high.
„
Start net or chamber film wrapping in manual mode and tie
the round bale.
For "Net wrapping" version: refer to page 124
For "Net and chamber film wrapping" version: refer to
page 125
The bale chamber is overfilled
so that it was opened by the
bale. „ Manually empty the bale chamber.
The tailgate is not correctly
locked. „ Open and close the tailgate again.
522101-
B01
Sensor B01 “Speed of bale chamber”
Possible cause Remedy
FMI 4: An undervoltage or a short circuit to ground has occurred.
FMI 5: A cable break has occurred or the current intensity is too weak.
The sensor shows external
damage. „ Check sensor and wiring for damage, refer to page 202 .
The wiring of the sensor is de-
fective.
522102-
B02
Sensor B02 "Tying process active"