manualshive.com logo in svg

Krone Comprima V 180, Original Operating Instructions, Page: 178 / 242

Share
Download
Krone Comprima V 180 Original Operating Instructions Download Page 178

16

Maintenance

16.13 Setting the scraper and stone deflector

178

Comprima V 180

Original Operating Instructions 150001053_00_en

Loosening scraper reinforcer

For the "Net and chamber film wrapping" version

1

3

1

3

4

2

RP000-302

3 scraper reinforcers (3) are also mounted on the scraper rail (1). These scraper reinforcers (3)
and the scraper rail (1) should be positioned on the spiral roller (2).

To set the scraper rail (1), loosen the scraper reinforcers (3):

„

Loosen the screw connections (2).

Æ

The scraper reinforcers (3) can be moved in the oblong hole.

Setting the scraper rail

For version with "Net wrapping" or "Net and chamber film wrapping"

5

6

3

1

2

3

4

7

RP000-531

„

Mount the scraper bar (1) in the centre of the oblong hole in the lateral housing part and
slightly tighten the screw connection (6) on both outer sides of the bale chamber.

„

Position the scraper rail (3) up to the spiral roller (4).

„

Tighten all screw connections (2) and the threaded pins (7).

„

Hammer in the clamping wedge (5) on both outer sides of the bale chamber and tighten the
screw connection (6).

„

Turn machine manually and check whether the scraper rail (3) is positioned the spiral
roller (4).

If the scraper rail (3) is not positioned on the spiral roller (4):

„

Loosen the screw connection (6) on the clamping wedge (5).

„

Turn the clamping wedge (5) by 180° and tighten the screw connection (6).

Summary of Contents for Comprima V 180



















































































































































































































































Reviews:

No comments