manualshive.com logo in svg

Krone Comprima V 180, Original Operating Instructions, Page: 103 / 242

Share
Download
Krone Comprima V 180 Original Operating Instructions Download Page 103

Terminal machine functions

12

Keys

12.2

Comprima V 180

Original Operating Instructions 150001053_00_en

103

Icon

Explanation

There are one or more error messages.
For version with "Touch-capable display": If this icon is pressed, the pending error
messages open in sequence, 

refer to page 200

.

Pre-signalling set.

For the “Working lights” version

Switched on.

Switched off.

12.2

Keys

The available icons comply with the equipment of the machine. The following represented icons
are not always available.

Icon

Designation

Explanation

Feed net in manual mode.

Press the key to guide the net to the round
bale.

Feed film in manual mode.

Press the key to guide the film to the round
bale.

Net wrapping in manual
mode.

The previously selected mode (manual
mode or automatic mode) is displayed in
the set tying type. Press the key to change
the mode.

Net wrapping in automatic
mode.

Chamber film wrapping in
manual mode.

The previously selected mode (manual
mode or automatic mode) is displayed in
the set tying type. Press the key to change
the mode.

Chamber film wrapping in
automatic mode.

Work lighting

Switching off

Switching ON

Summary of Contents for Comprima V 180



















































































































































































































































Reviews:

No comments