manualshive.com logo in svg

Krone Comprima V 180, Original Operating Instructions, Page: 114 / 242

Share
Download
Krone Comprima V 180 Original Operating Instructions Download Page 114

13

Terminal menus

13.3

Selecting a menu Level

114

Comprima V 180

Original Operating Instructions 150001053_00_en

Icon

Designation

Explanation

Sensor test

Quick access to sensor test (sensors relev-
ant for this menu)

Actuator test

Quick access to actuator test (actuators
relevant for this menu)

Disk

The mode or value is saved.

Plus

Increase the value.

Minus

Reduce the value.

Arrow pointing to the right

Display next mode.

Arrow pointing to the right

Display previous mode.

13.3

Selecting a menu Level

„

To bring up the menu level from the working screen, press 

.

Æ

The display indicates the menu level.

Return from the menu pages to the main menu:

„

Keep pressing 

 until the main menu appears.

For an overview of the menus: 

refer to page 112

.

13.4

Selecting a menu

Calling up menu

The menus are selected depending on used terminal (touch sensitive or not touch sensitive).

For version with “Touch sensitive and not touch sensitive terminal”

By means of adjacent keys

„

To select a menu, press the keys next to 

 or 

 until the desired menu is selected.

ð

The selected menu is highlighted in colour.

„

To call up the menu, press the key next to 

.

Æ

The menu opens.

Summary of Contents for Comprima V 180



















































































































































































































































Reviews:

No comments