manualshive.com logo in svg

Korg TRITON Extreme, Manual

The Korg TRITON Extreme, an exceptional synthesizer workstation, offers unparalleled musical versatility and creativity. Unlock its full potential with our comprehensive and user-friendly manual. Simply visit our website to download the latest update instructions, free of charge, ensuring you get the most out of your TRITON Extreme experience.

Share
Download
background image

310

Drumsample “0413–0416” settings

• TRITON Extreme, TRITON STUDIO 

→

 TRITON-

Rack and TRITON(.PCG file load/MIDI data dump):
Since these multisamples do not exist on the TRITON-
Rack or TRITON, they will not sound/operate correctly.

2-3. Combination or Sequencer mode “Program Select” bank 

H, I, J, K, L, M, N (EXB-A, B, C, D, E, F, G: TRITON 
STUDIO) settings

• TRITON Extreme, TRITON STUDIO 

→

 TRITON

(.PCG file load/MIDI data dump):
Since these program banks do not exist on the TRITON, 
they will not sound/operate correctly.

2-4. Program mode OSC1 Drum Kit “064(H) <E-D: TRITON 

STUDIO>–143(User)” settings

• TRITON Extreme, TRITON STUDIO 

→

 TRITON 

(.PCG file load/MIDI data dump/MIDI parameter 
change):
Since these drum kit numbers do not exist on the TRI-
TON, they will not sound/operate correctly.

2-5. RAM sample parameter “+12 dB” setting

• TRITON Extreme, TRITON STUDIO 

→

 TRITON, 

TRITON-Rack (.KSF file load):
Since the TRITON and TRITON-Rack do not have this 
sample parameter, the “+12 dB” On setting will be 
ignored. (As of November 2003)

[3] Parameters that are valid on the TRITON STU-

DIO but not on the TRITON Extreme

3-1. TRITON STUDIO Global mode parameters

Input (COMBI, PROG, SEQ, S.PLAY, DISK): “mLAN” settings

• TRITON STUDIO 

→

 TRITON Extreme

(.PCG file load/MIDI data dump):
The parameter settings are preserved by the TRITON 
Extreme as internal data, but are ignored. If this state is 
saved by the TRITON Extreme as a .PCG file or transmit-
ted via MIDI data dump, the data will be output with the 
settings that were loaded or received.

System Clock: “mLAN,” “Word Clock” settings

• TRITON STUDIO 

→

 TRITON Extreme (.PCG file 

load):
These parameter settings will not be loaded by the TRI-
TON Extreme.

S/P DIF Sample Rate

• TRITON STUDIO 

→

 TRITON Extreme (.PCG file 

load):
This parameter setting will not be loaded by the TRITON 
Extreme.

[4] Parameters that are valid on the TRITON-Rack 

but invalid on the TRITON Extreme, TRITON 
STUDIO and TRITON

4-1. Program mode Audition Riff and Transpose settings

• TRITON-Rack 

→

 TRITON Extreme, TRITON 

STUDIO or TRITON (.PCG file load/MIDI data dump/
MIDI parameter change):
The parameter settings will be saved by the TRITON 
Extreme, TRITON STUDIO or TRITON as internal data, 
but will be ignored. When the TRITON Extreme or TRI-
TON saves this state as a .PCG file or performs a MIDI 
data dump, the settings will be output in the condition in 
which they were loaded or received via MIDI data dump.

• TRITON Extreme, TRITON STUDIO or TRITON 

→

 

TRITON-Rack
(.PCG file load/MIDI data dump):
These parameters will be set to “Off” and “+00” respec-
tively.

4-2. Program, Combination, and Multi mode REALTIME 

CONTROLS [SELECT] C-mode settings

• TRITON-Rack 

→

 TRITON Extreme, TRITON 

STUDIO or TRITON (.PCG file load/MIDI data dump/
MIDI parameter change):
Parameter C settings will be saved by the TRITON 
Extreme, TRITON STUDIO or TRITON as internal data, 
but this data will be ignored, and operation will use A or 
B. When the TRITON Extreme, TRITON STUDIO or TRI-
TON saves this state as a .PCG file or performs a MIDI 
data dump, the settings will be output in the condition in 
which they were loaded or received via MIDI data dump.

4-3. Combination and Multi mode “Program Select” bank 

EXB-A, B, C, D, E, F, G, H settings

• TRITON-Rack 

→

 TRITON (.PCG/.SNG file load/MIDI 

data dump/MIDI parameter change):
Since the TRITON does not have these program banks, it 
will not sound/operate correctly.

• TRITON-Rack 

→

 TRITON Extreme, TRITON 

STUDIO (.PCG/.SNG file load/MIDI data dump/MIDI 
parameter change):
Since the TRITON Extreme and TRITON STUDIO do not 
implement program bank H, they will not sound or oper-
ate correctly.

Summary of Contents for TRITON Extreme



































































































































































































































































































































































Reviews:

No comments

Related manuals for TRITON Extreme

Sven Multimedia EL 4002 User Manual preview
Multimedia EL 4002
Brand: Sven Pages: 6
Saab 32 025 603 Installation Instructions Manual preview
32 025 603
Brand: Saab Pages: 15
Razer RZ03-0188 User Manual preview
RZ03-0188
Brand: Razer Pages: 12
BH FITNESS G-246 Manual preview
G-246
Brand: BH FITNESS Pages: 54
BH FITNESS G6520FB Manual preview
G6520FB
Brand: BH FITNESS Pages: 47
Waeco MagicWatch MWE850 Installation And Operating Manual preview
MagicWatch MWE850
Brand: Waeco Pages: 200
TESLACIGS WYE II 86W User Manual preview
WYE II 86W
Brand: TESLACIGS Pages: 7
Valeo PARK VISION Instruction Manual preview
PARK VISION
Brand: Valeo Pages: 48
BEALE AK280 User Manual preview
AK280
Brand: BEALE Pages: 41
G-Tek CYBORG 1000 TKL Manual preview
CYBORG 1000 TKL
Brand: G-Tek Pages: 8
G-Tek CYBORG 3000 Manual preview
CYBORG 3000
Brand: G-Tek Pages: 8
schwa-medico SPORECUP XTR4 Instruction Manual preview
SPORECUP XTR4
Brand: schwa-medico Pages: 64
Franklin Bookman III DBD-4028DL User Manual preview
Bookman III DBD-4028DL
Brand: Franklin Pages: 28
Franklin BOOKMAN SCD-770 User Manual preview
BOOKMAN SCD-770
Brand: Franklin Pages: 29
GMYLE NPL710001 Instruction Manual preview
NPL710001
Brand: GMYLE Pages: 1
Yihi SXmini T Class User Manual preview
SXmini T Class
Brand: Yihi Pages: 72
BH HI POWER G660 Instructions For Assembly And Use preview
G660
Brand: BH HI POWER Pages: 45
perixx PERIBOARD-410 User Manual preview
PERIBOARD-410
Brand: perixx Pages: 11

Brands by name

Popular brands

Load more brands