manualshive.com logo in svg

Korg TRITON Extreme, Manual

The Korg TRITON Extreme, an exceptional synthesizer workstation, offers unparalleled musical versatility and creativity. Unlock its full potential with our comprehensive and user-friendly manual. Simply visit our website to download the latest update instructions, free of charge, ensuring you get the most out of your TRITON Extreme experience.

Share
Download
background image

Appendices

309

In its various data formats, the TRITON Extreme maintains 
data compatibility with the TRITON/TRITON pro/TRITON 
proX and TRITON-Rack. Data can be exchanged by using a 
media to load/save, or by using MIDI exclusive data dump 
or parameter changes. However, you must be aware of the 
following points.
KARMA Music Workstation (system version 1.0 and 2.0) 
format and TRITON Le format .PCG/.SNG files can be con-
verted as they are loaded.
However, please note the following points.

In the following explanation, the term “TRITON” refers 
collectively to the TRITON/TRITON pro/TRITON 
proX.

[1] Parameters that are valid on the TRITON 

Extreme but not on the TRITON STUDIO, TRI-
TON-Rack, and TRITON.

1-1. Multisample settings in Program mode

• TRITON Extreme 

→

 TRITON STUDIO, TRITON-

Rack, TRITON (.PCG file load/MIDI data dump/MIDI 
parameter change):
These models do not have the corresponding multisam-
ples (corresponding to the EXB bank), and therefore will 
not sound or operate correctly.

1-2. Global mode P5: Drum Kit drum sample settings

• TRITON Extreme 

→

 TRITON STUDIO, TRITON-

Rack, TRITON (.PCG file load/MIDI data dump/MIDI 
parameter change):
These models do not have the corresponding drum sam-
ples (corresponding to the EXB bank), and therefore will 
not sound or operate correctly.

1-3. Program, Combination, Sequencer mode VALVE FORCE 

parameters

• TRITON Extreme 

→

 TRITON STUDIO, TRITON-

Rack, TRITON (.PCG file load/MIDI data dump):
The parameter settings are preserved by these models as 
internal data, but the data will be ignored. If you save 
this state as a .PCG file and load it into the TRITON 
Extreme, or transmit it to the TRITON Extreme as a MIDI 
data dump, the parameter settings will be initialized.

• TRITON Extreme 

→

 TRITON STUDIO, TRITON-

Rack, TRITON (MIDI parameter change):
These models do not receive MIDI parameter changes for 
VALVE FORCE.

1-4. Program, Combination, Sequencer mode REALTIME 

CONTROLS [SELECT] C mode settings

• TRITON Extreme 

→

 TRITON STUDIO, TRITON 

(.PCG file load/MIDI data dump/MIDI parameter 
change):
Realtime Controls C parameter settings are preserved by 
the TRITON STUDIO and TRITON as internal data, but 
the data will be ignored; either A or B mode settings will 
be used. If you save this state on the TRITON STUDIO or 
TRITON as a .PCG file or perform a MIDI data dump, the 
data will be output with the settings that were loaded or 
received.

• TRITON Extreme 

↔

 TRITON-Rack (.PCG file load/

MIDI data dump/MIDI parameter change):
C-mode settings will be used.

[2] Parameters that are valid on the TRITON 

Extreme and TRITON STUDIO but invalid on the 
TRITON

2-1. Arpeggio pattern settings in Program, Combination, and 

Sequencer modes

• TRITON Extreme, TRITON STUDIO 

→

 TRITON 

(.PCG file load/MIDI data dump/MIDI parameter 
change):
The TRITON does not have user arpeggio pattern num-
bers “U232 (E-C)–U506 (User),” and will not sound or 
operate correctly.

• TRITON Extreme, TRITON STUDIO 

→

 TRITON-

Rack (.PCG file load/MIDI data dump/MIDI parameter 
change):
The TRITON-Rack does not have user arpeggio pattern 
numbers “U328 (User)–U506 (User),” and will not sound 
or operate correctly.

2-2. Global mode parameters of the TRITON Extreme, TRITON 

STUDIO

Input (COMBI, PROG, SEQ, S.PLAY, MEDIA)
: S/P DIF In

• TRITON Extreme, TRITON STUDIO 

→

 TRITON-

Rack or TRITON
(.PCG file load/MIDI data dump):
Data other than this data will be loaded by the TRITON-
Rack or TRITON.

System Clock

• TRITON Extreme, TRITON STUDIO 

→

 TRITON

(.PCG file load/MIDI data dump):
The parameter setting will be saved by the TRITON as 
internal data, but this data will be ignored. When the 
TRITON saves a .PCG file or performs a MIDI data dump 
in this state, the setting that was loaded or received via 
MIDI data dump will be output.

System Clock “S/P DIF” setting

• TRITON Extreme, TRITON STUDIO 

→

 TRITON-

Rack (.PCG file load):
The parameter setting will not be loaded by the TRITON-
Rack.

Receive Ext. Realtime Command

• TRITON Extreme, TRITON STUDIO 

→

 TRITON-

Rack or TRITON (.PCG file load):
The setting of this parameter is saved by the TRITON-
Rack and TRITON as internal data, but the data itself will 
be ignored. If this state is saved by the TRITON-Rack or 
TRITON as a .PCG file, the file will be saved in the state 
that was loaded.

WAVE file Play Level
Auto Optimize RAM

• TRITON Extreme, TRITON STUDIO 

→

 TRITON-

Rack or TRITON (.PCG file load/MIDI data dump):
These parameter settings will be saved by the TRITON-
Rack or TRITON as internal data, but this data will be 
ignored. When the TRITON-Rack or TRITON saves a 
.PCG file or performs a MIDI data dump in this state, the 
settings that were loaded or received via MIDI data 
dump will be output.

• TRITON-Rack or TRITON 

→

 TRITON Extreme, 

TRITON STUDIO (MIDI data dump):
These parameters will be set to “Normal” and “Off” 
respectively.

Data compatibility

Summary of Contents for TRITON Extreme



































































































































































































































































































































































Reviews:

No comments

Related manuals for TRITON Extreme

Samsung VG-KBD2000 Manual preview
VG-KBD2000
Brand: Samsung Pages: 10
Samsung EJ-BT230 Quick Start Manual preview
EJ-BT230
Brand: Samsung Pages: 11
Saab 32 025 687 Installation Instructions Manual preview
32 025 687
Brand: Saab Pages: 9
A4Tech GL-6 User Manual preview
GL-6
Brand: A4Tech Pages: 8
Compex Wireless USA User Manual preview
Wireless USA
Brand: Compex Pages: 59
Acer SK-9662 Product Manual preview
SK-9662
Brand: Acer Pages: 3
Acer Accufeel G300 User Manual preview
Accufeel G300
Brand: Acer Pages: 18
Acer UA0B User Manual preview
UA0B
Brand: Acer Pages: 4
Acer SD-9080 Product Manual preview
SD-9080
Brand: Acer Pages: 3
Acer Iconia W700 User Manual preview
Iconia W700
Brand: Acer Pages: 2286
Acer SK-2063 Product Manual preview
SK-2063
Brand: Acer Pages: 2
Acer PREDATOR Aethon 300 PKB910 Quick Start Manual preview
PREDATOR Aethon 300 PKB910
Brand: Acer Pages: 58
Techly IDATA KB-300W User Manual preview
IDATA KB-300W
Brand: Techly Pages: 12
UWELL CALIBURN A2S User Manual preview
CALIBURN A2S
Brand: UWELL Pages: 68
CIGGO Tattoo Plus 75 User Manual preview
Tattoo Plus 75
Brand: CIGGO Pages: 16
Datalogic Universal Keyboard Wedge Connectivity Manual preview
Universal Keyboard Wedge
Brand: Datalogic Pages: 11
Trust 19404 Quick Installation Manual preview
19404
Brand: Trust Pages: 75
Franklin MWS-3053 User Manual preview
MWS-3053
Brand: Franklin Pages: 22

Brands by name

Popular brands

Load more brands