manualshive.com logo in svg

Korg TRITON Extreme, Manual

Share
Download
Korg TRITON Extreme Manual Download Page 354

KORG INC.

15 - 12, Shimotakaido 1 - chome, Suginami-ku, Tokyo, Japan.

 2004 KORG INC.

1602 GTH 

Printed in Japan

IMPORTANT NOTICE TO CONSUMERS

This product has been manufactured according to strict specifications and voltage requirements that
are applicable in the country in which it is intended that this product should be used. If you have
purchased this product via the internet, through mail order, and/or via a telephone sale, you must
verify that this product is intended to be used in the country in which you reside.
WARNING: Use of this product in any country other than that for which it is intended could be
dangerous and could invalidate the manufacturer’s or distributor’s warranty.
Please also retain your receipt as proof of purchase otherwise your product may be disqualified from
the manufacturer’s or distributor’s warranty.

Summary of Contents for TRITON Extreme



































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands