Keysight Technologies 86120B, User Manual

Page: 33 / 273

31
Getting Started
Cleaning Connections for Accurate Measurements
damaging particulates. If you think the use of such compounds is necessary,
refer to the compound manufacturer for information on application and
cleaning procedures.
To clean a non-lensed connector
C A U T I O N
Do not use any type of foam swab to clean optical fiber ends. Foam swabs can
leave filmy deposits on fiber ends that can degrade performance.
1 Apply pure isopropyl alcohol to a clean lint-free cotton swab or lens paper.
Table 1-2. Cleaning Accessories
Item Keysight Technologies Part Number
Pure isopropyl alcohol —
Cotton swabs 8520-0023
Small foam swabs 9300-1223
Compressed dust remover (non-residue) 8500-5262
Table 1-3. Dust Caps Provided with Lightwave Instruments
Item Keysight Technologies Part Number
Laser shutter cap 08145-64521
FC/PC dust cap 08154-44102
Biconic dust cap 08154-44105
DIN dust cap 5040-9364
HMS10/dust cap 5040-9361
ST dust cap 5040-9366