Keysight Technologies 86120B, User Manual

Page: 18 / 273

16
Getting Started
Step 2. Connect the Line-Power Cable
Step 2. Connect the Line-Power Cable
WA R N I N G
This is a Safety Class 1 Product (provided with protective earth).
The mains plug shall only be inserted in a socket outlet provided
with a protective earth contact. Any interruption of the protective
conductor inside or outside of the instrument is likely to make the
instrument dangerous. Intentional interruption is prohibited.
C A U T I O N
Always use the three-prong AC power cord supplied with this instrument.
Failure to ensure adequate earth grounding by not using this cord may cause
instrument damage.
C A U T I O N
Do not connect ac power until you have verified the line voltage is correct as
described in the following paragraphs. Damage to the equipment could result.
C A U T I O N
This instrument has autoranging line voltage input. Be sure the supply
voltage is within the specified range.
1 Verify that the line power meets the requirements shown in the following table.
2 Connect the line-power cord to the instrument’s rear-panel connector.
3 Connect the other end of the line-power cord to the power receptacle.
Line Power Requirements
Voltage max. 100 / 115 / 230 / 240 V~
Frequency 50 / 60 Hz