Keysight Technologies 86120B, User Manual

Page: 174 / 273

172
Programming Commands
CALCulate2 Subsystem
WLIMit:STOP[:WAVelength]
Sets the stopping wavelength for the wavelength limit range.
Syntax
:CALCulate2:WLIMit:STOP[WAVelength] {?|{<real> | MINimum | MAXimum }}
< real > is a wavelength value that is within the following limits:
Constant Description
MINimum start wavelength limit
MAXimum 1650.0 nm
Attribute Summary Non-sequential command
Preset State: 1650 nm
*RST State: 1650 nm
SCPI Compliance: instrument specific
Description This command sets the stopping range for the wavelength limit. The default units for
the <
real > parameter are meters. The stop wavelength value must be greater than or
equal to the start wavelength value or the stop wavelength will be clipped to the start
wavelength and a “Data out of range” error will be generated. Setting the start wave-
length is equivalent to setting the start frequency/wavenumber because of the
inverse relationship of frequency to wavelength.
Non-sequential command
Always use an *OPC? query or a *WAI command to ensure that this command
has the time to complete before sending any more commands to the instrument.
Refer to “Always force the Keysight 86120B to wait for non-sequential com-
mands” on page 92
for more information.