Keysight Technologies 86120B, User Manual

Page: 177 / 273

175
Programming Commands
CALCulate3 Subsystem
:REFerence
:FREQuency
[:WAVelength]
:WNUMber
[:STATe]
ASNR:CLEar
Clears the number of measurements used in the average signal-to-noise calculation.
Syntax
:CALCulate3:ASNR:CLEar
Attribute Summary Preset State: not affected
*RST State: not affected
SCPI Compliance: instrument specific
Description This command clears the number of measurements used in the average signal-to-
noise calculation. The current measurement is used as the new reference for the
average signal-to-noise calculation.
ASNR:COUNt
Sets the number of measurements to be used for the average signal-to-noise calcula-
tion.
Syntax
:CALCulate3:ASNR:COUNt {?|{<integer> | MINimum | MAXimum }}
<integer> is a value that is within the following limits:
Constant Description
MINimum 10
MAXimum 900
Attribute Summary Preset State: 100
*RST State: 100
SCPI Compliance: instrument specific