-
8
Select the menu item with the buttons
LEFT and RIGHT.
Press OK to open the parameter group.
Use the LEFT and RIGHT buttons to
select the paramater you want to set.
Press the OK button.
The selectable variable blinks.
Use the LEFT and RIGHT buttons to
select the variable value.
Press and hold the button for a swift
change of the variable.
Press the OK button to save the select-
ed value.
or
Press ESC to abort the change.
Press the OK button.
The selectable variable blinks.
Use the LEFT and RIGHT buttons to
select the variable value.
Press and hold the button for a swift
change of the variable.
Press OK briefly to save the value and
to jump to the next variable.
Press the OK button for more than 1
second to save set values.
or
Press ESC to abort the change.
Press the ESC ro return to the next
higher menu.
The plant is open during the operating time.
The plant is locked outside the operating
time.
24 hours open:
Set beginning and end of
the operating time to the same value.
24 hours closed:
Set the end of the oper-
ating time to an earlier value than the be-
ginning of the operating time
During the lighting time, the washing sta-
tion lights can be adjusted by a dimmer
switch.
Fixed public holidays are on the same day
every year.
On the set public holidays the operating
time selected for public holidays applies.
Note
Set the date to 00.00.XX for unused public
holidays.
Variable public holidays are on different
days every year. They must newly be set
every year.
On the set public holidays the operating
time selected for public holidays applies.
Note
Set the date to 00.00.00 for unused public
holidays.
Setting date, time and summer/winter time
change
Auto summer / winter time = YES:
Automatic change active. Summer time
(daylight saving time) begins on the last
sunday in March at 2:00 o'clock. Winter
time (normal time) begins on the last sun-
day in October at 3:00 o'clock.
Auto summer / winter time = NO:
No automatic time change.
Note
If automatic switching is active, either
"Som" (for summer) or "Wint" (for winter) is
displayed along with the date and time in
the right bottom corner of the display during
normal operation.
The coin value, as well as the coins, will tell
the different canals of the coin inspector,
how to evaluate them.
Value:
Value of the coins in washing units.
Re:
Value in currency units (e.g. Euro).
Undercarriage wash:
Minimum number of required washing units
to execute the undercarriage washing pro-
gramme.
Here, the run time of the different washing
programmes are set per washing unit.
If the system includes different high pres-
sure modules, different run times can be
set up of each type of pump.
Selecting pump type:
Two washing times can be set up for each
programme:
T1:
Standard washing time
T2: Special washing time, applies to cer-
tain weekdays or to a certain date
T2 applies to weekdays marked with an "*".
1=Monday,,,7=Sunday. T1 will apply on the
other days.
Additionally, T2 is applied on the set date.
1 Washing programme
2 Standard washing time T1 per washing
unit
3 Standard washing time T2 per washing
unit
Display language.
YES:
Programme "Rinse" is executed with
warm water.
NO:
Programme "Rinse" is executed with
cold water.
YES:
The hose heater is switched off after
operation and restarts one hour prior to op-
eration.
NO:
The hose heater is also active outside
the operating hours.
The washing stations marked with an "*"
are blocked. These washing stations will
not accept coins.
This function is provided for maintenance
work or repairs.
YES:
Operating time and lighting time are
controlled externally, bypassing the set-
tings in the control. The holiday settings are
ineffective.
NO:
The washing station is operated as set
up in the control.
After the washing credit is used up, the
wash station lighting stays on for the set
time.
actual:
currently measuring dimming val-
ue.
nominal:
Set dimming value, from which
point forward the basic and washing station
lights are switched on within the set up
lighting time.
Select the parameter you want to set
Set the parameter with a variable
Settng a parameter with several varia-
bles
Exiting the menu
Operating times
Lighting time
Fixed holidays
Non-fixed holidays
Date / Time
Coin value
Programme run times
System settings
46
EN
Summary of Contents for SB MU
