-
5
1 Pressure reducer
2 Manometer
Set pressure reducer to 0.4...0.5 MPa
(4...5 bar).
1 Dosing pump high pressure wash (DP
1)
2 Dosing pump hot wax (DP 2)
3 Dosing pump top care (DP 3)
4 Dosing pump optional (DP 4), for addi-
tional programmes
The dosing pumps dose the washing water
with the detergents in accordance with the
wash programme and the equipment of the
system.
Note
The dosage amount is optimally set by the
fitter when the plant is assembled. General-
ly no reset is necessary.
Fine adjustments are made on the control
(see Settings/Control). The basic settings
of the dosing pumps remains unchanged.
1 Ventilation lever
2 Ventilation button
3 Adjustment knob dosing volume
Pull out the adjustment knob for the
dosing volume.
Press and release the ventilation button
repeatedly and at the same time, rotate
the adjustment knob to the desired set-
ting.
Release the ventilation key.
Push in the adjustment knob for the
dosing volume.
The operation of the foam station and the
polish station does not differ. Thus, the fol-
lowing description applies for both types.
1 Pressure reducer air
2 Manometer compressed air
3
Detergent dosing
4 Detergent suction hose with filter
5 Manometer water
6 Pressure reducer water
The assembly is adjusted by the technician
during commissioning.
Adjust the quality of the foam on the
pressure reducer air only.
Note:
The set foam quality only remains consist-
ent if there are no bubbles in the detergent
suction hose.
Start foam programme to be set.
Perform default settings in accordance
with the following table.
The automatic change-over modifies the
quality of the foam when the temperature
set in the control is exceeded.
At an additional pressure reducer for air a
wetter foam quality is selected in order to
prevent excessively fast drying of the foam
in high ambient temperatures.
1 Pressure reducer air, low temperature
2 Pressure gauge air, low temperature
3 Pressure gauge air, high temperature
4 Pressure reducer air, high temperature
1 Input of detergent
2 Nozzle insert
3 Suction hose for detergent
Pull off the suction hose.
Select the nozzle insert for the desired
mixing ratio:
Compressor type Extreme
Setting dosing pumps
Basic adjustment
Deter-
gent
Position of
adjust-
ment knob
(%)
High pres-
sure
wash
RM 806
50
Hot wax
RM 820
50
Top care
RM 821
50
Contaminant
removal (op-
tion)
RM 806
50
Insect remov-
al (option)
RM 803
50
Foam / polish station
Basic adjustment
Compressed air
0.1...0.3 MPa
(1...3 bar)
Water
0.5 MPa
(5 bar)
Detergent
1,3%
Automatic change-over (option)
Rim cleaner
Nozzle colour
Water/detergent
no nozzle
1:1
grey
1,2:1
black
2:1
beige
4:1
red
6:1
white
9:1
blue
10:1
light brown
13:1
green
21:1
orange
26:1
brown
30:1
yellow
38:1
purple
50:1
pink
100:1
43
EN
Summary of Contents for SB MU
