-
6
Adjustment for RM 801, 10:1. Select the
blue nozzle for the RM 801.
Slide the nozzle insert all the way into
the detergent input.
Insert the suction hose.
Set pressure reducer for air to 3 bar.
Caution
Risk of damage due to acidic detergents.
Only use alkaline detergents to clean the
rims.
Note:
After performing the basic setup, the spray
pattern should only be changed by adjust-
ing the pressure reducer for air.
The uniform application onto the rims is fa-
cilitated if a suitable colouring agent is add-
ed to the rim cleaner concentrate.
1 Adjustment screw
Adjust the pressure of the micro emul-
sion as needed by turning the adjust-
ment screw.
1 Key "1/ON"
2 Control lamp operating state
3 Display
4 LEFT key
5 RIGHT key
6 OK button
7 ESC button
During normal operating mode, the control
panel display alternates between:
Day of the week, date, time, summer time
(Som)/winter time (Wint)
Operating time of the system on the current
day
Maintenance work due from customer ser-
vice (example).
If more than one maintenance procedure is
required, these will be shown in sequence.
If no maintenance procedures are required,
nothing will be shown.
Fault occurred (example).
If more than one fault is present, these will
be shown in sequence.
The number in parentheses shows the total
number of faults present.
If no faults are present, nothing will be
shown.
Note
To acknowledge faults see "Fault assis-
tance"
Press OK button for more than 2 sec-
onds.
Press the RIGHT button.
Press the OK button.
The menu "customer settings" (see follow-
ing page) has been reached.
Basic setting water/chemicals
Basic setting air
Micro-emulsion (intensive cleaning
complete)
Controls
Open the menu "customer settings"
44
EN
Summary of Contents for SB MU
