JUMO AQUIS touch P 202580, Operating Manual

Page: 27 / 322

27
5 Mounting
5.1 Notes
Mounting site
When determining the mounting site, it is important to ensure that the device
specifications are respected. The relevant tables containing details of case
specifications can be found in the chapter entitled "Technical Data" .
The device
must not be exposed to any severe shocks or permanent vibrations. Electro-
magnetic fields caused by equipment such as motors or transformers must be
avoided!
Climatic conditions
The ambient temperature and the relative humidity at the mounting site must
correspond to the technical data.
v
Chapter 20 "Technical data", Page 303
Installation position
The device can be installed in any position. However, the viewing angle of the
TFT touchscreen should be taken into consideration.
v
Chapter 20 "Technical data", Page 303
Space requirement
Ensure adequate access to the region around the cable entry points. The mini-
mum bending radius of the cables must be taken into account!
v
Chapter 5.2 "Dimensions", Page 28
DANGER!
Under no circumstances may the device be installed or removed while under
voltage! This poses the risk of electrocution.
Switch-off the entire system beforehand. This work must be performed only by
qualified personnel!
The device must never be installed in potentially-explosive areas! There is the
risk of an explosion.