JUMO AQUIS touch P 202580, Operating Manual

Page: 156 / 322

10 Configuration
156
10.21 External analog inputs
Open: Device menu
r
Configuration
r
External Analog Inputs
r
External analog inputs 1 to 8
Start
Display range
-99999 to +99999
a
Upper/lower limit for labeling the scale
when displaying measuring values, e.g. in
recorder
diagrams and bar graphs
End
Display range -99999 to +99999
a
a
The unit set for the particular manual value appears in the entry field.
Configuration point Selection/
setting option
Explanation
Configuration point Selection/
setting option
Explanation
Description up to 15 text characters Designation of the external analog input
Temperature None
Relative
Absolute For automatic conversion of temperature units, it
is necessary to know whether the analog value
received via the external analog input is an
abso-
lute temperature (temperature value on the Cel-
sius or
Fahrenheit scale) or a
relative temperature
(temperature difference).
If this analog value is not a temperature,
"none" must be entered here.
Unit up to 5 text characters Unit for the analog value received via the
external analog input
Decimal place Auto
Fixed comma format Decimal points in the display
Start
Display range -99999 to +99999
a
Upper/lower limit for labeling the scale
when displaying measuring values, e.g. in re-
corder
diagrams and bar graphs
End
Display range -99999 to +99999
a
Hold value No
Yes Nonvolatile storage of the last analog value re-
ceived
when the device restarts
Alarms 1/2 Alarms for external analog inputs are used to monitor analog values re-
ceived via the individual external analog inputs
in relation to adjustable limit values.
The alarm settings for all analog device functions are explained together.
v
Chapter 10.9.2 "Alarms for analog signals", Page 135
a
The unit set for the particular manual value appears in the entry field.