JUMO AQUIS touch P 202580, Operating Manual

Page: 31 / 322

31
5 Mounting
Procedure
(1) Metal case barrel of the JUMO AQUIS touch P
(2) Mounting elements
(3) Seal from the scope of delivery for the device
(4) Case front
(5) Panel/control cabinet
(1)
(2)
(3)
(5)
(4)
Step Action
1 Push the panel seal provided (3) from the rear panel of the device
over the case barrel to the front panel.
2 Place the device in the cutout provided for this purpose in the con-
trol panel (5) as shown in the drawing.
3 Insert the mounting elements (2) into the holders on the case pro-
vided for this purpose, as shown on the drawing.
4 Screw the mounting element firmly against the panel so that the
case front (4) of the device is tight against the panel (5) and the de-
vice is firmly seated.