JUMO AQUIS touch P 202580, Operating Manual

Page: 16 / 322

2 Acceptance of goods, storage, and transport
16
2.3.2 Protection against electrostatic discharge (ESD)
To prevent damage from ESD, electronic assemblies, or components with a
high internal resistance must be handled, packaged, and stored in an environ-
ment that protects against ESD. Measures that protect against electrostatic dis-
charge and electric fields are described in DIN EN 61340-5-1 and DIN EN
61340-5-2 "Protection of electronic devices from electrostatic phenomena".
When sending back electronic assemblies or components, please note the fol-
lowing:
•
Pack sensitive components only in an environment providing protection
against ESD. Such workplaces conduct existing electrostatic charges to
ground in a controlled manner and prevent electrostatic charge buildup due
to friction.
• Use only packaging intended specifically for ESD-sensitive assemblies/com-
ponents. These must be made from conductive plastics.
No liability is assumed for damage caused by electrostatic discharge (ESD).
2.4 Disposal
Disposing of the packaging material
All packaging material is recyclable.
CAUTION!
Electrostatic charges occur in non-ESD-protected environments.
Electrostatic discharge can damage assemblies or components.
For transport purposes, use only the ESD packaging provided.
DISPOSAL!
At the end of its service life, the device and any replaced parts do not belong
in the trash. These items are made from materials that can be reclaimed
through "recycling".
Dispose of the device and the packaging material as required by regulations
and in an environmentally sound manner!
The country-specific laws and regulations for handling and disposing of waste
must be observed!