JUMO AQUIS touch P 202580, Operating Manual

Page: 95 / 322

95
8 Operation
On the operation screen of each controller, it is possible to change the current
controller setpoint value, switch to the "Manual mode" or start "Self-optimiza-
tion".
(1) Display of the digital controller output signals as indicator lights
(2) "Manual entry" button for changing the current setpoint value
A change to the currently active setpoint value is transferred to the con-
troller parameters. When external setpoint values are used, this button is
hidden.
(3) Bar graph to display the current output level
(4) Start/cancel "self-optimization" button
Self-optimization is used to determine the optimal controller parameters
automatically.
(5) "Manual mode" on/off button
When manual mode is activated, the output level assumes a preconfig-
ured
value and can then be changed manually.
v
Chapter 8.5.2 "Controller in the manual mode", Page 96
(6) Numerical display of the current output level
(7) Display of the current setpoint value
(8) Display of the current actual value
(1)
(2)
(3)
(5)
(6)
(7)
(8)
(4)