JUMO AQUIS touch P 202580, Operating Manual

Page: 130 / 322

10 Configuration
130
CR/Ci measuring range configuration
Open: Device menu
r
Configuration
r
Analog inputs
r
Analysis input 1 to 4
r
Measuring range 1 to 4
Configuration point Selection/
setting option
Explanation
TDS factor 0.01 to 2.00 only for conductive conductivity with
TDS compensation:
Conversion factor from measured conductivity to
display unit (see configuration item "Unit" in this
table)
Compensation for CR/Ci:
Off,
TC linear,
natural water,
natural water with
expanded temperature
range
Type of temperature compensation for conduc-
tivity measurement
only for CR:
TDS,
ASTM neutral,
ASTM acid,
ASTM alkaline
only for Ci:
TC curve,
NaOH 0 to 12%,
NaOH 25 to 50%,
HNO3 0 to 25%,
HNO3 36 to 82%,
H2SO4 0 to 28%,
H2SO4 36 to 85%,
H2SO4 92 to 99%,
HCL 0 to 18%,
HCL 22 to 44%
Unit for
calculation for CR/Ci:
µS/cm
mS/cm
Unit in which the conductivity is displayed
only for CR:
k
Ω
/cm
M
Ω
/cm
Unit up to 5 text characters only for conductive conductivity measure-
ment with
TDS compensation:
Unit for the process variable to be displayed for
TDS measurements or when using customer-
specific linearization (e.g. ppm or mg/l)