JUMO AQUIS touch P 202580, Operating Manual

Page: 266 / 322

19 PC Setup Program
266
19.8.8 Customer-specific linearization
Value tables and formula for customer-specific linearization must be created
with the JUMO PC setup program. During data transfer to the device, the linear-
ization is then loaded into the JUMO AQUIS touch P together with the setup. Af-
ter the linearizations have been loaded into the device, they can be used when
configuring the following types of analog inputs:
•
Universal inputs with a standard signal
(except pH/T-compensated chlorine measurement)
v
Chapter 10.5.2 "Universal inputs of base unit and optional boards", Page
123
• Temperature inputs for RTD temperature probes with a customer-specific
characteristic curve (up to 400
Ω
, 4000
Ω
or 100 k
Ω
)
v
Chapter 10.5.1 "Base unit temperature inputs", Page 121
• Analysis measuring inputs for electrolytic conductivity
v
Chapter 10.5.5 "CR/Ci measuring ranges", Page 129
Open Settings:
Only Setup
r
Customer-Specific Linearization
r
Tabs 1 to 8