JUMO AQUIS touch P 202580, Operating Manual

Page: 142 / 322

10 Configuration
142
Pulse length output
With a pulse width output, the output level generated by the controller has the
form of the pulse/pause ratio of a square-wave signal with a fixed frequency
(pulse width modulation). Output of this type of signal from the device uses a dig-
ital output.
Alarm ack. Inactive
Active Activation/deactivation of the acknowledgment
function
Dosing alarms of the respective controller must
be acknowledged in the "Alarm list" when "Alarm
acknowledgement" is activated. Dosing alarms
are not cleared automatically when the control
deviation drops to a value that is less than or
equal to the alarm tolerance. The alarm tolerance
is set in the controller parameters.
v
Chapter 9.2 "Parameter Sets (Controller pa-
rameter)", Page 110.
Configuration point Selection/
setting option
Explanation
100%
50%
0%
Cy
10%
90%
90%
10%
T
ON
50%
50%
T
Off
10%
90%
0 1
w
X
P
X
P
x - w
x
Y