JAC A-CLASS, Manual

Page: 79 / 176

Tips
◎ Do not drive your vehicle with
parking brake not released, otherw
-se it will result in brake system
overheating and cause undue abras
-ion or damage of brake system
parts. Check and confirm the parking
brake is completely released and the
brake warning lamp is off before
driving.
Tips
◎ When the brake ABS system is
working, the brake pedal may
present slight vibration and noise
may
release from the engine
compartment, which is normal
phenomenon, indicating ABS is
working normally.
Parking brake
The parking brake lever is between
the front row seats.
To tension the parking brake, please
step the brake pedal and pull the
parking brake level up. If the ignition
switch is switched on, the brake
system warning lamp will be on. See
Brake system warning lamp in
Chapter
Ⅱ To release the parking
brake system, keep stepping the
brake pedal and pull the parking
Though the brake system is equip
-ped ABS, please do not step the
brake pedal frequently under any
road conditions. Step the brake pedal
to the end and hold it to enable the
ABS. brake level up until the release
button can be pressed. Keep pres
-sing the release button and lower
the parking brake lever to the end at
the same time.
79