JAC A-CLASS, Manual

Page: 128 / 176

In any of the following circumsta
-nces, you need to replace the tyre
with a new one:
◇ Tyre rubber revealing tire cord or
cord fabric.
◇ Tyre cracks, and the crack is deep
enough so that you can see the cord
or fabric.
◇ The tyre bulges, crowns and is
layered.
◇ The tyre is punched, scratched or
otherwise damaged, and such
damage cannot be repaired.
Buy new tyre
Check tyre and load information
volume label on the vehicle to know
the tyre model and size you need.
Make sure dimension, load index,
speed grade and structure type
(diagonal tyre, bias belted tyre or
Notes
Mixed use of tyres will cause
vehicle out of control while
driving. If you use tyres of
different dimension or model
(radial tyre and bias belted tyre)
in a mixed way, you will be
unable to control the vehicle
normally, thus causing accident.
Using
tyres of different
dimension will also damage the
vehicle. Therefore, all the wheels
must use tyres of the same
dimension and model.
Wheel positioning and tyre balance
To prolong service life of tyres and
improve optimal performance of the
entire car to an utmost extent, we
have carried out careful positioning
and balancing of tyres and wheels
before the car leaves the factory. It is
unnecessary
to regularly adjust
wheel positioning and tyre balance.
However, if abnormal wear of tyre of
wheel disalignment is discovered,
you may need to check wheel
positioning. If wheels move up and
down while running on flat road, you
shall balance tyres and wheels again.
128
radial tyre) of the new tyre remains
the same with that of the original
one.