JAC A-CLASS, Manual

Page: 44 / 176

Steering and lane shift signal
The steering signal operating lever
has two upward (right turn) and two
downward
(left turn) positions.
These positions are used to release
turn and lane shift signal.
To release turn signal: push the
operating lever to the upward or
downward limit. The operating lever
will
automatically restore after
steering terminates.
The
combine instrument of
instrument desk has an arrowhead,
which will twinkle to indicate the
steering direction or lane shift
direction.
In case the arrowhead twinkles too
fast when you release steering or
lane shift signal, the signal lamp may
be burning off and the other drivers
will not see your steering signal.If
the arrowhead does not twinkle at all
when you release steering signal,
check whether the bulb is burnt off
first and then check the fuse.
If any bulb is burnt off, replace it in
time to avoid traffic accident. Headlamp switch
Operate the headlamp through
rotating the barrel type switch at the
combination switch end. The parking
lamp, end-outline marker lamp, tail
lamp and instrument lamp will be on
when the switch is in the first
position and the headlamp will be on
when the switch is in the second
position.
44
Tips
◎ Turn signal lamp is only enabled
after ignition switch is turned to
"ON".