JAC A-CLASS, Manual

Page: 45 / 176

High/low beam switch
To shift the headlamp from low
beam to high beam, push the
steering signal/multipurpose operat
-ing lever away from you.
With the high beam being switched
on, the ignition lamp on the combine
instrument will also be on if the
ignition switch is switched on.
To shift the headlamp from high
beam to low beam, pull the steering
signal/multi-purpose operating lever
towards you.
Headlamp flashing
This function allows you to release
overtaking signal to the front vehicle
driver using the high beam headla
-mp.
To use this function, pull the steering
signal/multi-purpose operating lever
towards you slightly
and then
release it, the headlamp will be on.
Even if headlamp switch is turned to
"OFF", the headlamp can still flash.
Front windscreen wiper
45
Operate the front windscreen wiper
through using the operating lever at
right side of steering column. The
front windscreen wiper can be
operated only when the ignition
switch is switched on.
◇ Intermittent (INT) Turn the handle
downward to 1st gear and a delayed
washing cycle will be selected.
◇ Low (LOW) Turn the handle
downward to 2nd gear, the wiper
will operate at a low speed.