JAC A-CLASS, Manual

Page: 115 / 176

Check liquid level
Regularly check braking fluid in the
braking fluid tank. Liquid level shall
be located between the MIN and
MAX signs on the side. If liquid level
is located at MIN sign, add braking
liquid to the position of MAX sign. Do
not add too much.
If braking liquid level is too low, the
brake alarm light will lighten. Refer to
Chapter III Braking System Alarm
Light.
Notes
If braking fluid is too much, it
may be splashed onto the
engine. If engine temperature is
high enough, the braking fluid
will burn, thus burning you or
others and damaging the car.
Therefore,
you cannot add
braking liquid until repair of
brake
hydraulic system is
finished.
Add braking fluid
When it is required to add braking
fluid, new DOT4 braking liquid in
unopened container only can be
used.
Before opening braking fluid tank
cover, you should clean tank cover
and surrounding parts first. In this
way, dirt can be prevented in the
tank.
115