JAC A-CLASS, Manual

Page: 143 / 176

Adjust safety belt
You should lower the safety belt to
your buttocks instead of waist. If the
safety belt is placed too high, you
may skid out from the safety belt in
an accident or emergent brake, with
increased injury rate.
Fasten safety belt
To fasten safety belt, pull the safety
belt out of the retracting device, and
insert a metal clip into the snap ring
until a click is heard, indicating that
the safety belt is locked.
Seat safety belt can adjust to a
proper length only it is adjusted
manually, so that it can surround
your buttocks better. If you lean
forward in a slow and unblocked
way, the safety belt can extend to
allow free action. In the event of
Three-point safety belt of front row
soap solution or warm water. Do not
use bleaching powder, dying agent,
powerful detergent or grinding agent
as they will damage or weaken fibre
compositions of the safety belt.
When does a safety belt need
replacement
If a traffic accident occurs to a
vehicle, replace the safety belt
assembly and components in use.
Even if no damage is found, replace
them. For issues concerning safety
belt operations, please consult with
the authorized after-sales service
shop of JAC.
emergency brake or impact, the
safety belt will be locked.
143