JAC A-CLASS, Manual

Page: 112 / 176

Power steering fluid
Power steering liquid tank is located
in
the front of the engine
compartment on passenger side of
operation until the coolant is cooled.
The car must be parked on a flat
ground.
And make sure the
airconditioning is shut down.
When to Check power steering liqu
-id
Loss of power steering liquid
indicates existence of malfunction.
In such case, you should overhaul
the system.
How to check power steering liquid
Check power steering liquid
according to the following steps:
Turn off the ignition switch, and wait
for cooling of the engine compart
-ment.
◇ Wipe tank cap and upper surface
of stock solution tank clean.
◇ Open tank cover.
◇ Add power steering liquid to a
suitable level.
◇ Open tank cover again and screw
it tight completely.
◇ The liquid level shall be located
between lower limit and upper limit
(MAX) signs of the stock solution
tank.
If the liquid level is declined to the
lower limit (MIN) sign or below, you
should add power steering liquid to
increase the level to the upper limit
(MAX) sign.
the car. To confirm position of stock
solution tank, please refer to General
Layout of Engine Compartment in
the chapter.
112