JAC A-CLASS, Manual

Page: 108 / 176

Clean air filter
If filter member of an air filter is too
dirty, it may be cleaned according to
the following procedure.
1)Shake filter member of the air filter
to drop dust off.
2)Clean interior enclosure of the air
filter.
3)Cover the filter enclosure with wet
cloth
while cleaning the filter
member.
4)Clean filter member of the air filter
with compressed air in opposite
direction of normal airflow.
For maintenance regulation, refer to
Chapter VIII Maintenance Plan.
See Engine overheating, Chapter IV
if the vehicle occurs the fault of
engine overheating.
It is prohibited to use coolant with
concentration above 60% or solution
with concentration below 35% ,
otherwise engine cooling system
may
be damaged. Select the
appropriate concentration according
to the table below when filling or
changing coolant.
Make sure to check coolant in
winter, and adjust for different
circumstances according to the table
above. You are advised to use
coolant recommended by a JAC
franchised
after-sales service
center.
Freezing
point （℃）
Anti-freezing
solution （ % ）
Water
(%)
-15 35% 65%
-25 40% 60%
-35 50% 50%
-45 60% 40%
Engine coolant
Notes
Do not add any coolant when the
engine is ina hot state. Filling must
be carried out after the engine is
cooled. Otherwise the engine will
beseriouslydamaged.
Notes
Try to use antifreeze solution of
the same brand. Production
formulas of antifreeze solution
of different brands are different.
108