JAC A-CLASS, Manual

Page: 92 / 176

92
Note
Determine the proper position of
jumper cable, do not reel it to the
rotating members of the engine
compartment. Otherwise, it will
cause damage to the vehicle and
result in personal injury.
Connect the jumper cable
Connect the jumper cable according
to the following sequences when
starting the vehicle
1. Clip one end of the jumper cable
to the positive terminal of charged
battery. (There is mark of "+" on the
battery shell or terminal)
2. Clip the other end of this jumper
cable to the positive terminal of the
empty battery. (There is mark of "+"
on the terminal)
3. Clip one end of the second jumper
Note
Before connecting the vehicle to
be charged in the end, do not
connect the battery negative (-)
terminal.
Connect
the clip which is
connected in the end to the steel
bracket of engine cylinder block
through
bolts. The final
connection point should be as far
from the battery as possible.
Connecting the jumper cable to
the negative terminal of empty
battery may generate electric
arc, cause battery explosion and
result in severe personal injury or
vehicle damage.
cable to the negative terminal of
charged battery. (There is mark of -
on the battery shell or terminal)