JAC A-CLASS, Manual

Page: 147 / 176

A child should be seated on the rear
seat, with the protection device
activated
properly, which can
minimize the risk of injury from
accidents,
emergency brake or
sudden movement. According to
statistic data of accidents, a child
who is seated on the rear seat can
be protected better than on the front
seat, with the protection device
activated properly. Big children who
cannot use child protection system
should use safety belt.
You
must use qualified child
protection system. If there are
babies in your vehicle, you must
activate child protection system
(safety seat) for them. If child
protection system (safety seat) is
not provided. If children are not
provided
with reliable child
Child protection system
protection system, a collision
accident may result in injury or death
to them. Babies must be provided
with qualified baby seat. When
buying
specific child protection
system for your child, be sure to
confirm
whether the system
matches with your child, vehicle seat
and seat safety belt. When installing
child protection system, refer to the
instruction manual provided by the
manufacturer.
Note
◇ Install child protection system
on the rear seat. Never install a
baby seat on the assistant driver
seat. Otherwise, in the event of
accidents, expansion of assistant
driver's airbag may cause severe
injury or death to the child in baby
seat. Therefore, you must install
child protection system on the
rear seat.
◇ The temperature of safety belt
or child protection system in a
sealed
vehicle may rise.
Therefore, check seat surface and
snap ring for temperature before
placing a child on the seat to avoid
burn.
◇ If the child protection system is
not in use, store it in the boot,
secure it with a safety belt so that
it will not be thrown out forward in
the event of emergent brake or
accident.
◇ Big child not suitable for use of
child protection system must be
seated on the rear seat, with use
of crotch/shoulder safety belt.
147