JAC A-CLASS, Manual

Page: 75 / 176

75
2. Steps of car start
a.Start engine
b.Enable brake pedal, push shift
lever upward to + or move shift
lever upward twice and reach+.
Thus, the instrument displays "1" or
"2".
c. Release brake handle, slightly tre
-ad brake pedal and start the car.
current gear indication is not
displayed after 10s, turn the key to
"OFF" to turn off integrated instrum
-ent and repeat operations as
above. If it still encounters a failure,
please
contact JAC franchised
after-sales service center.
Note
Only gear 1, gear 2 and reverse
gear R are available for starting a
car.
In detail, gear 2 is available to
start a car on icy road surfaces.
The system will automatically
switch automatic transmission
into manual transmission.
Please
don't release brake
handle or shutdown handle if a
car is parked for long. At this
time, if the driver doesn't tread
accelerator pedal, the car starts
slowly and the clutch is still partly
connected,
thus shortening
clutch service life. What's worse,
the clutch may suffer from
abrasions.
Drastic acceleration will result in
clutch acceleration abrasion
and even cause clutch abras
-ions. Therefore, please don't
frequently make drastic accele
-ration during running.
When leaving a car, the driver
shall shut down engine and
enable parking brake.
Please keep treading brake
pedal from engine shutdown to
system stop. Release the brake
pedal till the instrument screen
stops working.
Please don't unplug ignition key
when car is running. Otherw
-ise, the system will be under
an irregular condition and the
steering wheel is locked during
first steering till the car stops
running.