JAC A-CLASS, Manual

Page: 126 / 176

How to check tyre pressure
Tyre pressure shall be checked with
high quality pocket tyre pressure
gauge.
One cannot determine
whether tyre pressure is proper by
visual method only. Radial tyres
seem normal although they are
inflated insufficiently. Tyre pressure
shall be checked under cold state.
Cold tyre means the vehicle stopped
driving for more than 3h or drives for
less than 1.6km.
Remove valve cock from tyre valve
core, and powerfully connect tyre
pressure gauge onto the valve to
measure
pressure reading. No
adjustment is required if inflation
pressure of the cold tyre conforms to
tyre and load information, as well as
the
recommended pressure on
volume label. If the pressure is too
low, inflate continuously until it
Notes
Make sure mount the valve cap
onto the valve core again. The
valve cap can prevent entry of
dust and moisture.
Description of environmental protec
-tion
◎ Too low tyre pressure will
increase oil consumption, as well as
environmental pollution.
Tyre check and replacement
126
reaches the recommended value.
If the pressure is too high, press the
metal valve core in the center of the
valve to deflate. Check tyre pressure
again with the tyre pressure gauge. As long as abnormal wear is
discovered, you shall replace the tyre
as soon as possible and check tyre
positioning. Meanwhile, you should
also check whether the tyre or
wheel is damaged.
Regular tyre replacement aims to
maintain even wear of all tyres of the
car. The first replacement is most
important.