JAC A-CLASS, Manual

Page: 111 / 176

liquid is kept at the position of upper
limit sign for at least 5 minutes.
Start and run the engine without
closing the expansion kettle cover
until you can feel that upper hose of
the radiator becomes heat. Take care
not to contact cooling fan of the
engine. At that moment, coolant
level in the expansion kettle may
reduce. If the liquid level is below
the upper limit sign, add more liquid
mixture into the expansion kettle to
let the liquid level hit the upper limit
sign; and then close the cover and
make sure to install the cover in right
place.
Check electronic cooling
fan
Notes
The cooling fan is controlled by
temperature of engine coolant.
Sometimes the cooling fan runs,
although the engine does not
run,. When working near the
cooling fan, it must take care
not to be hurt by fan blades.
That the fan stops running
automatically following drop in
temperature of engine coolant,
the fan is normal phenomena.
Check engine cooling fan
If temperature of engine coolant is
high or the air-conditioning works,
engine cooling fan will run automati
-cally.
If coolant in the expansion kettle is
boiling, please do not perform any
Please regularly check lubricant of
manual transmission according to
the maintenance table in Chapter VI.
Recommended transmission lubrica
-nt
Transmission can use JAC original
products only. Suitable transmission
lubricant shall be replaced according
to changes of weather.
It is recommended to use 80W/90
transmission lubricant in summer in
northern regions (75W/90 transmiss
-ion lubricant in winter) and all year
round in southern regions.
Quantity of transmission lubricant
Transmission capacity is 2.3L.
Transmission lubricant ch
-eck
111